Israel Tasmota Plug
 
Upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
 
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
 
Lates Tasmota  full version pre flashed
Fully compatible with official Tasmota OTA server
Consumptiom monitoring
 
Specification:
 
Input voltage：100-240VAC 50/60Hz
Chipset ESP8285 2M
Current：16A(Max)
Power rating：2200W
Wireless standard：IEEE802.11b/g/n,2.4GHz
Housing Color：Whtie
Operation Temperature：-20℃～+50℃
Plastic material:ABS+PC
Fire-protection rating:94-V0
 
Template:
 
{"NAME":"Athom Plug V2","GPIO":[0,0,0,3104,0,32,0,0,224,576,0,0,0,0],"FLAG":0,"BASE":18}
 
GPIOs:
 
GPIO3： CSE7766 Rx
GPIO5： Button1
GPIO12 ：Relay1
GPIO13 ：LedLinki
 
Notice:
HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.
To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.