No Relay ESPhome AU Plug , Automatically detect by Home Assistant
No Relay HLW8032 consumption monitoring chipset build in, NO calibration needed
Suitable for monitoring the energy consumption of devices that are continuously powered on
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
Build in ESP8285 chipset with 2M flash
Yaml File Download:
https://github.com/athom-tech/athom-configs/blob/main/athom-without-relay-plug.yaml
Specification:
- Input voltage：100-240VAC 50/60Hz
- Current：10A(Max)
- Power rating：2200W
- Wireless standard：IEEE802.11b/g/n,2.4GHz
- Housing Color：Whtie
- Operation Temperature：-20℃～+50℃
- Plastic material:ABS+PC
- Fire-protection rating:94-V0
GPIOs:
GPIO3： CSE7766 Rx
GPIO5： Button1
GPIO13 ：LedLinki
Steps to Install :
*Power on the plug
*Use your phone/computer search the SSID: athom_xxxxxxx
*Connect it and set the SSID and password of your 2.4G WiFI
*Go your Home Assitant find the new device and complete installation