This product is temporarily prohibited from being shipped to the EU. Buyers who require shipping to the EU are advised not to place orders. Orders that are placed will be canceled and refunded.
WLED Sounds Reactive WS2811 COB Starter Kit
 
The starter kit includes: ​
​1x LS8P ESP32 WLED controller ​
1x 12V7A Power Adaptor ​
1x WS2811 COB 576LED  5m ​
1x DC Cable
​1x User Manual
 
Wire Diagram
 
1. Connect the power cable and strip cable to the controller. ​ ​
2. Connect the strip light to the controller, ensuring that VCC is connected to 12V, DAT to D0, and GND to GND. ​ ​
3.Connect the power adaptor to the controller.
 
 
The LS8P ESP32 Sounds Reactive WLED Controller
 
ESP32-WROOM-32E Chipset
2 Channels I2S PDM Digital Microphone Built in
 
GPIO:
Button（GPIO0)
Relay（GPIO2）
DATA1（GPIO18）
DCLK1（GPIO5）
DATA2（GPIO17）
DCLK2（GPIO16）
IR（GPIO25）
I2S_SDPIN（GPIO32 ）
I2S_WSPIN（GPIO15 ）
I2S_CKPIN（-1）
 
The 12V WS2811 COB 576 LED Strip Light
 
Length: 5M
LED: 576 leds/m
FPCB Width:10mm
PCB Color: White
WaterProof: IP20 (None-waterproof)
 
The Power Adaptor
 
EU/US/UK Standard Optional
AC Input:110-240V 50/60Hz
DC Output: 12V7A
 
Tips
 
1. To reset the controller, please press and hold the key more than 10s
 
2. Upgrade to oifficial firmware might disable sound reaction function.
 
To build your own firmware please visit: https://github.com/athom-tech/Sound-Reactive-WLED