Greetings. My 15w bulbs are running 0.13.1 which has some custom bit of code in which allows the devices to be factory defaulted via fast power cycle. I see that a recent recommendation was to upgrade to https://github.com/Aircoookie/WLED/releases/download/v0.14.4/WLED_0.14.4_ESP02.bin.gz but I don't believe that compile has this option integrated. Any way we can get an official fork from Athom that has the fast power cycle factory default option integrated for either 0.14.4 or 0.15.0-b3? I'm a bit hesitant to upgrade without this feature as these bulbs are extremely difficult to serial flash requiring disassembly.
top of page
To test this feature, visit your live site.
Please provide v0.14.4 or v0.15.0-b3 fork with fast power cycle factory default option or compile with power-ap usermod
Please provide v0.14.4 or v0.15.0-b3 fork with fast power cycle factory default option or compile with power-ap usermod
4 comments
Like
Comments (4)
bottom of page
https://github.com/athom-tech/WLED/releases/download/0.14.4/Athom_15W_RGBCCT.bin.gz
Home Assistant does not integrate WLED below 0.14 😱 - current is 0.14.4
Yes, now it will be necessary, I have 3 lamps that stopped working due to HA minimum firmware requirements. Home Assistant 2024.8.x requires the WLED firmware to be higher than 14.0 and it is at 14.0.b
Due to memory space limitations, we do not recommend upgrading. If you upgrade, it will be difficult to upgrade to later versions.